Drive Medical GentleFeed+ MQ9130, Instructions & Assembly

3.  The Gentlefeed

+

 breast pump operates in two modes: Stim-

ulation and Expression. Once the device is turned on, the timer 

will start and the pump will begin simultaneously in the Stimulation 

Mode at a fixed speed (88T/min) for two minutes. The device will 

then move to the Expression Mode at Suction Level 2 with Speed 

Level 1 (factory default).
4.  If your milk starts to flow earlier, press the MODE button to toggle 

between Stimulation and Expression modes. Make sure the milk 

is flowing into the bottle properly. If you do not press the MODE 

button, the pump will automatically switch to Expression mode after 

two minutes.
5.  Press the MODE button to toggle between Stimulation and Ex-

pression modes.
6.  To adjust the suction to your comfort level during pumping, press 

the “+” on the SUCTION CONTROL button to increase the suction, 

or the “-“ to decrease the suction. 
7.  To adjust the speed to your comfort level during pumping, press 

the “+” on the SPEED CONTROL button to increase the speed, or 

the “-“ to decrease the speed. 
8.  Once you are finished pumping, switch off the breast pump, 

unplug the device, and disassemble the pump. Clean the device 

and accessories per the Cleaning Instructions. Close the bottle and 

store it for later use. 

Guidelines for Storing and Thawing 

Breast Milk Operation

Freshly Expressed

 Breast Milk

Thawed Breast Milk

Room Temperature Cooler with Ice Pack

Refrigerator

Freezer

4–6 hours

at 66–78 °F

(19–26 °C)

Breast Milk Storage Guidelines

Use within 24 hours

24 hours

at 59 °F

(15 °C)

3–5 days

at  39 °F

 (4 °C)

6–12 months

0–4 °F

(-18–-20 °C)

Use within 24 hours

Use within 24 

hours

Use within 24 

hours