8
2. Assembling the Cap Combo
Make sure the Cap Plug 04 is plugged into the hole of the Cap 05
and the ensure it is tightened securely.
Place the Damper 07 onto the Grid 08 and then place Cap 05
onto it to form a complete (b) Cap Combo.
Put the Seal Ring 06 on the head of (a), then screw (b) onto the
breast shield body 03, and make sure it is tightened and secure to
avoid leakage.
3. Assembling the Valve
Place the Membrane onto the Valve
Body by pressing the Membrane into
the installation holes as illustrated.
Make sure the Membrane is completely
flat and tight with no visible gap. Mount
the Valve Body to the Breast Shield
Body securely as illustrated.
a
03
06
