1. Grasp the top hand grip of the walker.
With other hand, push the pivot lock
handle down towards the cross brace.
NOTE: The pivot lock MUST be directly on top
of the cross brace.
2. Reverse STEP 1 to close the walker.
1. Adjust leg extensions by depressing the
snap button through the appropriate
extension and allowing it to snap through
the appropraite hole on the walker
leg frame.
NOTE: Make certain the snap buttons are fully
engaged into the adjustment hole of each leg
frame and are at the same height before using.
2. Repeat this procedure for each of the leg
extensions.
figure 1
WEIGHT CAPACITY 300 LBS
opening/folding the walker
adjusting the leg extensions
figure 2
