1. Commode frame
2. Bucket frame
3. Legs (4)
4. Backrest
6
5
7
4
1
2
3
parts list
5. Toilet seat
6. Cover
7. Pail & lid
assembly instructions
1. Open commode frame (1) as shown below and place on
the floor.
2. Slide the hook on the bucket frame (2) over the
receptacle located on the back of the commode frame.
3. Secure bucket frame in place by inserting the front
cross brace into the receptacles located on the front of
the commode frame. The push buttons will “click” in
place when they are secure.
4. Turn the frame upside-down. Insert the legs (3) into
each receptacle by depressing the push pins and sliding
into place. The push buttons will “click” in place when
they are secure.
