adjustments
1. Trunk harness can be adjusted by opening cam
buckles and moving the straps.
2. Laterals can be adjusted in height and width by
loosening the knob, raising or lowering the
bracket. Width adjustability can also be achieved
by loosening the knob and changing the position
of the sliding flat bracket.
3. Depth of the abductor can be adjusted by
loosening knob and moving the bracket in or out.
lateral support
1. Remove bolt (D) and black spacer. (figure 4)
2. Loosen knob and screw (E) and slide over back
mounting bracket.
3. Tighten screw a little, and the knob should be
used when adjusting the height or width.
figure 4
D
E
