3. Insert back wheel (B) into back of frame
by depressing push pin and sliding into
the back receptacle, making sure the
wheels face outwards from the frame.
The push pin will snap into place when
secure. Repeat for the second back
wheel. (Figure 3)
4. Unfold the Dynamic Rollator by
pressing down on both sides of the
seat frame. (Figure 4)
5. Insert the handles (C) into the handle
receptacles. Press in the red buttons
located on the back of the Dynamic
Rollator and slide the handles into the
frame to secure the handles in place.
(Figure 5)
Rev.1.07.21.14
Figure 5
C
Figure 3
B
Figure 4
Summary of Contents for Q-011000
Page 10: ...Rev 1 07 21 14 ...
