6
Handgrips must be adjusted parallel to the walking
direction!
Fixing lever itself can be adjusted in the desired position
by simultaneously pulling and twisting.
For readjustment of the height of the handgrips unlock
the fixing lever by turning it counterclockwise. Then fix
the handgrip how described above.
Unfold
Position the walking device on its wheels. Push the front
frame forward by pressing on the handgrips down and
pulling backwards until the walking device stands on
four wheels. Then press the seat down until it clicks into
place on the crossbar.
Fitting with basket and tray
Hang up the basket with the front hook in the frame
under the seat plate and place the tray with its small
feet in the holes in the seat plate (see picture).
Indication
Walking device – for indoor and outdoor use – for com-
pensation and improvement respectively of restricted
ability of walking.
The purpose of walking devices is to compensate for or
at least improve restricted walking ability in users (ex-
pansion of range and/or mobility).
Persons with restricted hand/arm functions require spe-
cial adjustments/versions of handgrips or hand rests/
armrests.
For persons with balance disorders walking frames are
not recommended, this is to be checked by an assess-
ment in an individual case. If it is necessary a compa-
nion must be present.
Contraindication
Use of the Rollator is not recommended for persons
suffering from: perceptual disorders, severe imbalance
disorders, an inability to sit.
Scope of delivery contents
1. Walking device
2. Basket
3. Tray
4. Cane holder
5. Operating instructions
Installation
Height adjustment handgrips
Insert the tube of the adjustable handgrip into the frame
at least to the “MAX” marking.
Fix it in the desired height with the fixing lever by tur-
ning it clockwise. Adjust both handgrips on the same
height / level.
EN
Summary of Contents for Road
Page 2: ...2 ...
