5
Specification
Electrical Requirements
115VAC/60Hz
Power Consumption
75W
Dimensions
4.1” (105mm) High
×5.7” (145mm) Wide
× 7.9” (200mm) Deep
Weight
1.6kg (3.53lbs)
Sound Pressure Level
58dB(A)
Max. Comp. Pressure
30 Psig or greater
Neb. Operating Pressure
10~14 Psig
Liter Flow Range
4 - 8 LPM
Particle Size
Less Than 5 microns
Operating Temperature
10
o
C ~ 40
o
C (50
o
F to 104
o
F)
Operating Humidity
Up to 95% non-condensing
Storage/Transport Temperature Range
-20
o
C ~ 60
o
C (-4
o
F to 140
o
F)
Storage/Transport Humidity
Up to 95% non-condensing
(1). Conditions may vary based on altitude above sea level, barometric pressure and
temperature. Specification subjects to change without notice.
(2). This product complies with the following standards: C22.2 No 601.1-M90, UL Std.
No 2601-1 and IEC/EN 60601-1-1.
(3). For electromagnetic compatibility the standards are based as follow: CSA 601.1-2
and IEC/EN 60601-1-2.
(4). Protection against electric shock is classified as
Type II
.
(5). Degree of protection against electric shock is classified as
Type BF
.
(6). Mode of operation belongs to continuous mode.
(7). Equipment not suitable for use in the presence of a flammable anesthetic mixture
with air or with oxygen or nitrous oxide
(8). Degree of protection against ingress of water is rated as IPX0.
Warning:
To reduce the risk of burns, electrocution, fire or injury:
Warning:
To reduce the risk of infection:
