This document and the information contained herein, is the exclusive property of Drivecon and represents a non-public, confidential and proprietary trade secret that may not be
reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Drivecon.
Copyright © (2015) Drivecon. All rights reserved.
(19)
ERASE THE TRANSMITTER FROM THE RECEIVER
1. Press the Function button on the receiver. Function LED lights red.
2. Press the Select button on the receiver. Keep pressed.
All relay LEDs light red.
3. All relay LEDs go out. Release the Select button.
All transmitters are erased from the receiver.
Note! If function LED on the receiver flashes red, one or several transmitters are still registered in the
receiver.
TURN THE TRANSMITTER OFF
1. Press the stop button.
NOTE! When the transmitter is active and the stop button is pressed, all relays go off.
LOGOUT
NOTE! Quick logout can only be made when the transmitter is on and the radio link is up.
QUICK LOGOUT
1. Press button 7. Keep pressed.
2. Press the stop button.
LOGOUT FROM RECEIVER
1. Press the receiver Select button.
LED 10 (orange) lights.
2. Keep pressed (for more than 4 seconds).
LED 10 (orange) goes off.
3. The transmitter is now logged off. Any other registered transmitter can log in.
