HeatPack Furnace Installation and Operation Manual
30
9.2 Installation and connection of the “RTD” thermal probe
IMPORTANT
THE PROPER POSITIONING OF THE “RTD” THERMAL PROBE IS ESSENTIAL TO
THE PROPER FUNCTIONING OF THE FURNACE. INSTALL IT IN THE OPENING
PROVIDED FOR THIS PURPOSE ON THE START-OFF PLENUM.
9.2.1 With plenum (B) only
Step 1.
Pre drill the four plate holes
(L)
on the plenum with a 1/8
"
drill bit. Using 4 self-
drilling screws
(D)
, install the plate
(L)
supplied with the furnace on the plenum
(B)
. Make
sure to have the notch on the plate up.
Step 2.
Install the bottom of the RTD probe support
(M)
on the furnace using 2 screws
(C).
Summary of Contents for HeatPack DF00500
