background image

TRIMS AND DUAL RATES 

Throttle Trim

  If the vehicle drives forward without throttle input, rotate the throttle trim knob slightly left.

  If the vehicle drives backwards without throttle input,

 rotate the throttle trim knob slightly right.

Steering Trim

  If the vehicle tracks right (when viewed from behind), rotate the steering trim knob slightly left.

•  If the vehicle tracks left (when viewed from behind),

 rotate the steering trim knob slightly right.

  Check that the servo saver screw is fully tightened to ensure that your vehicle tracks straight.

Throttle Dual Rate

  If you need to limit the maximum speed of your vehicle, rotate the “TH.D/R” knob 

counterclockwise. For higher top speeds, rotate the knob clockwise.

Steering Dual Rate

  If you need to limit the amount of steering your vehic

le has, rotate the “ST.D/R” knob 

counterclockwise. For more steering, rotate the knob clockwise.

NOTE:

 We recommend limiting the vehicle’s maximum speed for beginners and gradually 

increasing the top speed once you become more comfortable with the controls.

DRIVING THE VEHICLE 

•  To slowly drive forward, pull the trigger slightly. To drive faster, 

pull the trigger further

.

•  To brake, push the trigger. To drive in reverse, push again.
•  During a crash,

 release the trigger

.

•  To turn, rotate the wheel to the left or right.
•  Adjust the steering trim if the car doesn’t track straight (see 

below).

•  When the vehicle battery becomes low, the vehicle will start to slow down.
•  Allow the battery to cool before recharging.
•  Make sure to turn both the vehic

le and the radio off after each use.

•  ALWAYS unplug the battery after each use.

Forward

Left

Left

Right

Right

Forward

Neutral

Brake/
Reverse

Reverse

DRIVING TIPS 

•  Always release the throttle trigger right away following a crash to prevent damaging the electronics.

  The vehicle should be operated in an open space with no people or animals nearby.

  Do not operate this vehicle on the street.

1.  Install the battery into the vehicle and 

connect the battery.

2.  Secure battery strap to post using clips.

3. Switch radio on.

4. Switch vehicle on.

Reviews: