●
In the event of a crash, place the battery into a
fi reproof
container
immediately. Examine the battery for damage
before further use.
●
Only operate and store batteries between 40-110° F (4-
43° C).
●
NEVER
allow the battery temperature to exceed 140° F
[60° C] during operation.
●
NEVER disassemble or modify a battery
, its wiring,
or puncture cells, as this may result in fi re.
●
Do not allow the battery to short circuit by touching ex-
posed wires together.
●
Stop the operation of your model immediately when the
battery power is low. A battery failure can occur when
attempting to recharge an over-discharged battery.
●
LiPo batteries
must always
be recycled or disposed of
properly.
CHARGING
Plug the charger into any USB port on a computer or to a
USB to AC adapter. The LED on the charger will illuminate
solid red while the battery is charging. The red LED will go
out when charging is complete.
●
NEVER
leave the battery unattended while charging.
●
DO NOT
allow the USB port to power down while the
charger is connected to the battery.
●
ALWAYS
unplug the charger from the USB port and the
battery when charging is complete.
●
NEVER
charge a puffed or damaged battery.
CONTROLLER SETUP
Remove the battery
cover to insert the
included (4) AA batteries.
Reinstall the battery
cover.
LINKING
1. Turn on the controller with
the left stick at its lowest
position. The LED on the
controller will fl ash, indicating
it is waiting for the arming
sequence.
2. Slide the fl ight battery
i n t o t h e s l o t o n t h e
underside of the Verso
quad. Connect the fl ight
battery to the quad and
place it upright on a level
surface. The LEDs on the
quad will fl ash rapidly while
it is linking to the controller.
Then they will blink slowly
while it waits for the arming
routine.
3. In order to arm the Verso
quad you must move the
throttle stick to full throttle and
then back down to the lowest
position. The LEDs on the
quad will go solid. The quad
is now armed and ready to fl y.
CONTROL RATES
The responsiveness of the quad to the control sticks is
adjustable using the rate buttons on the controller. Beginner
pilots will want the quad less responsive and should choose
the 20% rate button. As your piloting skills improve, the
higher rates can be used for more aggressive fl ying. Be
sure to have more fl ying space when using the 60% and
100% control rates.
When the control rate is
changed, you will see
the selected control rate
momentarily displayed on
the controller LCD screen.
3