Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
Figure 107: When you save a mission, you will be prompted to enter a new name for it.
Touch Save Changes to confirm the name you’ve entered, or Cancel Changes to use the
default name.
You will have the opportunity to give the mission a distinctive name, as shown in Figure
107, or you can touch Cancel Changes to use the default name. The default name will be
"Mission X", where X is the number after the highest numbered mission, or 1 if there is no
other numbered mission.
Figure 108: The mission you have created will be displayed. Touch it to expand it and see
buttons for loading it, renaming it, or deleting it. Touch it again to minimize it.
Once you’ve finished naming the mission, it will show up in a list in the missions menu, as
shown in Figure 108. If you touch the mission, you can toggle whether its entry is expanded.
Last Updated March 12, 2020
Page 122
