Ignis Operations Manual (DJI M600 Variant)
Drone Amplified
When it is expanded, you’ll see buttons to Load it, Rename it, or Delete it. If you touch
the Rename button, you’ll see the interface for naming the mission, like in Figure 107. If
you touch the Delete button, the mission will be deleted. If you touch the Load button, the
mission will be loaded, and the Load button will change to an Undo Load button.
Figure 109: Each mission’s name is shown in white text, and beneath it is the date it was
created and the kinds of mission data it contains.
Missions in the mission list are sorted from most recently created at the top, to oldest
at the bottom. Underneath the mission’s name is the date the mission was created, and
what the mission contains, as shown in Figure 109. When you load a mission, if it contains
waypoints, all of your current waypoints will be removed and replaced with the mission’s
waypoints. But, if it does not have waypoints, then you can load it and it will not clear
your currently placed waypoints. This works similarly for if the mission contains a transect
region and/or a geofence.
Last Updated March 12, 2020
Page 123
