Ignis Operations Manual
Drone Amplified
waypoints to add a new waypoint there. Touching a waypoint will select it and give you the
option to delete it, as shown below.
Figure 7.15b: Touch a waypoint to select it and make the delete bubble appear above it.
Touch the delete bubble to delete that waypoint. Touch anywhere else to deselect it.
Touch the “Clear” button to remove all of the waypoints. The “Undo” and “Redo” buttons
can be used to undo and redo adding, deleting, and clearing waypoints. If the drone is flying
along a waypoint mission, then the “Stop” button will stop the mission and give you manual
control of the drone again. You can also regain manual control of the drone by switching to
mode P on the controller.
Last Updated
Page 124
Apr 13, 2022
