Ignis Operations Manual
Drone Amplified
Figure 7.16b: The Settings button shows controls for the length and orientation of the
transect lines.
If you touch the Settings button, you will see controls to configure the transect lines.
Touch the Settings button again to close these controls.
Zig-zag Heading:
The direction of the arrow pointing towards the last transect lines, in
degrees clockwise from North. The transect lines will be perpendicular to this direction.
Transect Spacing:
The distance between transect lines. The first transect line will be
generated at half this distance from the edge of the transect region.
Overshoot Distance:
Extends the transect lines a short distance beyond the boundary of
the region.
Usage:
What these transect lines will be used for. Just Flying is for if you just want to fly the
path. Activated payload will cause the generated waypoints to be activated for dropping
with Ignis along the transects. Mapping will show additional controls and interface
elements for designing missions where the drone will be taking photos of the area with a
downward-facing camera.
Last Updated
Page 135
Apr 13, 2022
