Ignis Operations Manual
Drone Amplified
Touch the zig-zagging line icon with a circle at the end to select it as the current tool.
This tool will be surrounded in a colored box while it is selected. Touch it again while it is
selected to change to a different color, as shown in Figure 7.18.2. While this tool is selected,
tapping the map will make marks of the selected color.
The first time you tap the map, a dot will be placed there, and the dot will be selected,
indicated by a circle around it. Tap the dot again to deselect it, leaving the dot on the map,
and tap a dot again to re-select it. So, double-tapping the map will leave a dot at that
location.
While a dot is selected, tapping the map or another dot will draw a line from the selected
dot to the touched location, and will select the vertex of the line at the touched location.
Touching a new location will again draw a line from the selected vertex or dot to the
touched location, and select the vertex at the touched location, so this can be continued to
make winding lines. You can drag a dot or line vertex to move it to a new location.
The lines drawn by the flight path drawing tool are part of the same system as this tool,
and can also be connected or moved around while using this tool.
7.18.3 Marker Drawing
Figure 7.18.3: Placing markers on the map. The thermometer is the currently selected
marker, indicated by how the marker tool icon now shows the thermometer.
Last Updated
Page 150
Apr 13, 2022
