Ignis Operations Manual
Drone Amplified
8 Service and Maintenance
The Ignis system was designed with minimal maintenance requirements. Key to the
longevity of the system is to regularly clean any dust or other buildups from the system and
flush the fluid reservoir system with clean water as outlined in Section 4. We also
recommend inspecting the needles for clogs or other damage before and after each flight
and replacing them as needed. This section outlines additional maintenance procedures.
Please contact Drone Amplified with any questions.
8.1 Every Flight Maintenance
Before and after every fight the needles should be removed and inspected for blockage
and debris as detailed in 4. The needles can be cleaned and reused after using a thin rigid
wire to remove any blockage. Eventually the custom-cut of the needle that prevents
blockage may wear and the needle should be replaced. This should be done if a needle
regularly collects debris buildup during flight.
8.2 Daily Maintenance
The post-flight checklist (Section 4) goes over all of the daily maintenance that is needed
before storing. This includes:
• Flushing the fluid system with water and completely emptying it.
• Removing the Dropper and cleaning it well
• Clean all dust and ash from hopper
• Checking for damage.
Last Updated
Page 155
Apr 13, 2022
