Ignis Operations Manual
Drone Amplified
Figure 9.2d: Three connectors installed.
Next, plug in the three cables as shown in Figure 9.2d. Make sure that the black wires on
the connectors are all on the left. The yellow and green cables should be installed on the
lower row of connectors labeled sBus (green on right, yellow on left). The blue cable should
attach to the connector labeled API, with the white wire on the pin all the way right (note the
4th pin on the right if the header is unused). Incorrect connections could cause damage to
the Matrice or Ignis.
Figure 9.2e: Attach USB port to upper rail under battery bay 6.
Last Updated
Page 165
Apr 13, 2022
