Ignis Operations Manual
Drone Amplified
require adjustment of this parameter. We recommend testing under controlled conditions to
ensure the results are as expected whenever changing antifreeze types or when there are
significant changes to the ambient temperature.
1.11 Antifreeze Jug Pump Setup
Refilling Ignis with antifreeze is made faster and easier by using the included hand
pump and jug mount. To prepare to use the setup, start by removing the factory cap from
the jug of antifreeze and installing the customized cap by inserting the tube with the pickup
clunk attached to the jug first (Figure 1.11a).
Figure 1.11a: Put the pickup clunk and tube into the jug first and tighten the cap.
The custom cap has been tested with most of the common 1 gal jugs of antifreeze
available but is not guaranteed to fit all possible brands. Tighten the cap onto the jug.
Secure the pump mounting bracket by snapping the front around the cap and zip-tying the
rear to the jug handle as shown in Figure 1.11b. Connect the red marked line from the fill
coupler to the red marked port on the hand pump. Finally, connect the remaining line from
the cap to the remaining port on the hand pump.
Last Updated
Page 19
Apr 13, 2022
