Ignis Operations Manual
Drone Amplified
In the privacy-enhanced version of the app, the first-time registration process must be
manually started, and will temporarily disable the firewall. Follow the instructions displayed
on the main menu.
7.3.2 Connecting the Remote Controller
When you connect the remote controller to your mobile device using a USB cable, you
may see a prompt to pick which app should be opened when this USB accessory is
connected. If you do see this prompt, select this app, and the status at the bottom of the
main screen will change to either: "Connect to drone: Failure (Disconnected from drone)" if
the drone is not on, or "Connect to drone: Success" if the drone is on.
If you do not see this pop-up and another app automatically opens, that app may have
been selected as the default app to open. Go to your Android device’s Settings, Apps, and
click on that app. Next, to the Open by default setting for that app, and clear defaults. Now,
reconnect the controller, and you should see the prompt.
7.4 Settings
Figure 7.4: App Settings
Pressing the “SETTINGS” button from the main menu will open a screen where the app’s
settings can be changed, shown in
. The following is a description of each
setting:
Last Updated
Page 55
Apr 13, 2022
