Ignis Operations Manual
Drone Amplified
App control via RC channels:
This setting appears if you didn't select "RC Channels". This
links to
.
Stabilize Servo Mount:
If you're using a servo as a gimbal, you can enable this to make the
flight controller attempt to compensate for the pitch and roll of the aircraft in its control
signals.
Figure 7.8.3f: Battery Monitoring
Selecting Battery Monitoring (deprecated), Battery 1 Monitoring, or Battery 2
Monitoring from the Flight Controller Parameters screen will show you a screen similar to
Figure 7.8.3f, which has options for setting up how the flight controller estimates the
battery level. The options are:
System Battery Voltage:
Displays the voltage the flight controller thinks the battery is at.
This should change as you adjust other settings here.
System Battery Current:
Displays the amount of current the flight controller thinks it's
drawing from the battery. This should change as you adjust other settings here.
System Battery Percent Remaining:
Displays the amount of energy the flight controller
thinks is left in the battery. This should change as you adjust other settings here.
Monitoring information source:
How the flight controller gets its battery information.
Typically this is from a Power Module, but if you're using MAVLink compatible smart
batteries, then you might select External. We don't recommend External, because if the
Last Updated
Page 89
Apr 13, 2022
