Ignis Operations Manual
Drone Amplified
4.1.2 Environmental Conditions and Forecast
Environmental Conditions and Forecast:
WITHIN LIMITS
Ensure that the weather and the forecasted conditions are within limits for both the Ignis
system and the drone. See
for detailed specifications.
In addition, storage in hot conditions or leaving the system exposed to direct sunlight
may cause the system to exceed its operational temperature even if the air temperature is
within limits.
4.1.3 Inspect for Visible Damage
Inspect for Visible Damage:
NO DAMAGE
Perform a visual inspection to ensure that there is no damage to the system and that all
cables, connectors, and screws are secure and clean. In particular, check:
●
The magnets on the extended cylinders on the slipper block protrude slightly from
the aluminum cylinders and are clean and undamaged (see figure below).
●
The needle assemblies were not damaged in storage or transport.
Do not fly it with any worn or damaged parts.
Figure 4.1.3: Magnets on extended cylinders on slipper block must protrude slightly, be
clean and undamaged
Last Updated
Page 30
Apr 13, 2022
