Parachute Manual DRS-M300 v2.3-EN (2022-08-10)
©2022 Drone Rescue Systems GmbH
20/26
Loading and unloading the parachute
6.2.1
Put the container under tension
First open the release mechanism of the
which is the small white shutter at the bottom. The
easiest way to do so is to get underneath the shutter
with your fingernail and lift it to the end stop.
Use a solid object which fits the inner diameter of
the
and which is longer than the whole
unit. A plastic pipe is very convenient, but a small
bottle of water works as well. Use it to gently push
down the catapult platform until it reaches the
bottom position and exert counter-pressure with
your hand when doing so to avoid damaging the
UAV's arm or landing gear.
Release the shutter and gently push it back in place
until it does not stick out of the container tube. Then
gently decrease the pressure on the catapult
platform.
Caution:
In case the shutter is not fully back in place
or is manually pulled out, the parachute
will get deployed and might cause injuries
or damages!
