For Installation and Operation videos visit
www.droneskyhook.com/product-support
Drone-Sky-Hook - ARROW
Professional Release & Drop device for DJI Phantom 4 / Phantom 3
Model numbers: DSH-SRD2-P4-3; DSH-DRD2-P4-3; DSH-SRDP2-P4-3; DSH-DRDP2-P4-3
Quick Installation Guide - DJI Phantom 4 (all models)
v1.2
Slide the alignment pin brackets on
both of the rear landing gear until
they lock in place
Align the Drone Sky Hook Arrow’s
hole with the aligment pin
Press down the Drone Sky Hook
Arrow on one side until it locks to
the landing gear
Press down the other side of the
Drone Sky Hook Arrow until it locks
to the landing gear
The Alignment pins on both sides
shoud be fully inserted
The LED Sensors is installed under
the front right electric motor
Slide the LED Sensor into the
narow section of the drone’s arm
The LED Sensor should fully cover the drone’s lens
Fully insert the plug of the LED
Sensor cable into the ‘SENS’ port
on the Drone Sky Hook Arrow
ALL SET !
Correct
Wrong
1
2
3
4
5
6
7
8
9
10
