Drone Sky Hook DSH-DRD1-P3, Installation And Operation Manual

www.droneskyhook.com

Page 

23

 of 

28

Operation 
 

Drone-Sky-Hook Release & Drop Device – Control Modes of the Single Drop Wheel 

DSH Models:

 Single Release & Drop / Single Release & Drop PLUS 

Operation Mode 1 – Drone Rotation 
 

Remote Controller (Mode 2) 

LEFT STICK 

Operation 

 
Quickly Rotate (YAW) the drone two complete turns counter clockwise to drop the payload. 
 
To set the drop wheel back to its previous position, Quickly Rotate (YAW) the drone again two complete 
turns counter clockwise. 

Operation Mode 2 – Drone Remote Controller C1/C2 Button and/or DJI App       

Note: Use the DJI App to assign C1 or C2 button to Turn On/Off the front LEDs 

Remote Controller 

C1 / C2 Button 

Operation 

 
Press C1 or C2 twice in quick succession (while maintaining about 0.5-1 second between each 
press) to drop the payload. 
 
To set the drop wheel back to its previous position, again press C1 or C2 twice in quick 
succession (while maintaining about 0.5-1 second between each press). 
 

DJI App 

Operation 

Settings – Main Controller Settings – Advanced 

Settings 

 
In the App menu switch the drone’s front LEDs ON and then OFF or OFF and then ON. 
(Total of one ON-OFF or OFF-ON cycle) to simulate the operation of the C1 or C2 buttons on 
the drone’s remote controller (see above). 
 
Maintain about 0.5-1 second idle duration between each switch operation. 

Operation Mode 3 – Manual – FUNC button on DSH unit 

DSH Release & Drop unit 

Operation 

 
Press twice the device’s FUNC button to simulate the operation of the C1 or C2 buttons on the 
drone’s remote controller (see above). 
 
Maintain about 0.5-1 second idle duration between each operation of the FUNC button. 

IMPORTANT NOTE

: At the end of each operation wait 3 seconds for the execution your command and before the initiation of the next command (False 

Command Avoidance Algorithm (FCAA)).