background image

   

www.droneskyhook.com

 

Page 

13

 of 

17

 

 

Operation 

 

Battery Charging of the Drone-Sky-Hook LED SearchLight with Built-In Laser Pointer 
for DJI Mavic Pro and Mavic Pro Platinum 
 
Charging 

 
Plug the provided USB cable to the Searchlight batteries box. Connect the other end of this cable to a standard 5V / 1A 
USB charger (like a mobile phone charger or other 5V / 1A charger. The specified charger output current should be no 
less than 1A and no more than 2.1A). 
 
Charge the Searchlight batteries overnight (12 hours) for maximum battery capacity. IMPORTANT: Disconnect it from the 
charger after 12 hours. 
 
Do not charge the batteries when the ambient temperature is below 32 degrees Fahrenheit (0 degrees Celsius) or above 
104 degrees Fahrenheit (40 degrees Celsius). 
 
 

Charging the SearchLight batteries during storage 

 
Verify that the Searchlight is completely turned OFF and the Red light on its batteries box is OFF. This will prevent 
continuous battery drain due to the Searchlight’s standby current. 
 
To completely turn OFF the Searchlight and prevent continuous battery drain, verify that the AUX Channel is ON and then 
turn OFF the Searchlight by pressing its pushbutton multiple times until the Red light on its batteries box turns OFF. 
 
NOTE: The Searchlight draws standby current from its batteries even when the AUX Channel is OFF. Follow this 
procedure to completely turn OFF the Searchlight and prevent continuous battery drain. 
 
Charge the Searchlight batteries overnight (12 hours) every 4-6 months to maintain maximum battery capacity. 
IMPORTANT: Disconnect it from the charger after 12 hours. 
 
Do not charge the batteries when the ambient temperature is below 32 degrees Fahrenheit (0 degrees Celsius) or above 
104 degrees Fahrenheit (40 degrees Celsius). 

 

Summary of Contents for DSH-LSL1-MP


















Reviews: