www.droneskyhook.com
Page
14
of
17
Operation
Please click on the following link to watch the use of the drone Remote Controller C1/C2 button to control and set the
Drop Wheel and Searchlight. These videos are applicable for Mavic Pro, Mavic Pro Platinum, Phantom 4 and Phantom 3
together with Drone Sky Hook Release & Drop PLUS models only and a SearchLight.
https://youtu.be/bG4lBDKNdKE
https://youtu.be/l9lDXQcLWKQ
Operation of the LED SearchLight with Built-In Laser Pointer for DJI Mavic Pro and
Mavic Pro Platinum
Connect the Searchlight to the AUX Channel jack on the Release and Drop PLUS device.
Turn ON the AUX Channel and then select the Searchlight desired light output mode by pressing the Searchlight
pushbutton multiple times.
When the Searchlight is turned ON, the Red light on its batteries box will be illuminated.
See operation video in the product support page.
At the end of the Searchlight operation you must completely turn OFF the Searchlight to prevent continuous battery drain.
Verify that the AUX Channel is ON and then turn OFF the Searchlight by pressing its pushbutton multiple times until the
Red light on its batteries box turns OFF.
NOTE: The Searchlight draws standby current from its batteries even when the AUX Channel is OFF. Follow this
procedure to completely turn OFF the Searchlight and prevent continuous battery drain.
Press the SearchLight
pushbutton to turn it On or
Off and to change the
SearchLight operation
modes.
Press the pushbutton
multiple times to select the
desired operation mode or
function.
