D R O P P I S A R A
I N S TA L L AT I O N O F
T H E P O O L
Approximately 4 people are needed to move the pool. Please be extremely careful
when moving the pool to avoid accidents. For example, when you are lowering the
pool into a hole in the terrace, we recommend the use of lifting straps to ensure a safe
installation. Reserve approximately one hour for the installation.
The installer is responsible for the installation, and the buyer is responsible to
ensure that the installation is carried out according to the provided instructions.
Any damage caused by an installation error is not covered by the warranty. The stove
is not integrated into the pool. It is delivered in separate parts with the shipment,
and you must install it by yourself according to the instructions. The customer is
always responsible for carrying out the foundation work for the pool. In addition,
the customer is responsible for installing the stove. The remote-controlled LED
pool lights have already been installed.
Phase 1. Installation of the stove
The stove must be installed on an even, hard foundation and at the same level as the
pool. Make sure that the stove’s upper return hose moves in the direction of the pool
and clearly upwards. The stove must never be connected so that the water return is
turned off because this creates pressure inside the stove.
The stove comes with 3 metres of hose. The hoses must be cut to the correct length.
The stove can also be placed further away from the pool, but please note that the
hoses must be straight (no bending). The recommended maximum distance of the
stove with free water circulation from the upper lead-in is one metre. If you place
the stove any further, note that the power weakens the further the stove is placed.
