DOC-0128 Rev F
© 2017 DROPLET MEASUREMENT TECHNOLOGIES
7 8
If serial output is set to
User Defined
, users can select the desired output channels from a list of all
available channels. To include channels in the serial stream, select the channels by clicking on them.
Holding down the <Shift> and <Control> keys allows you to select multiple channels at once. Note
that the order of channels must follow that in the list of all available channels.
12.6
DMT Tab (Accesses Service Tabs)
The DMT tab Figure 52) is used to access the CCN service tabs. These tabs are hidden and locked
during normal operation. They can be accessed as follows:
1)
Click just below the text window in the middle of the screen.
2)
A white text box should appear (Figure 53).
3)
Type in the password
Service
.
Figure 53: Text Box for Entering Password to Access DMT-Service Tab
Figure 52: DMT Service Tab
