DOC-0128 Rev F
© 2017 DROPLET MEASUREMENT TECHNOLOGIES
8 6
12.8.1.1
Normal Output
“Normal” output is a subset of all the available CCN-200 channels. The data is divided into two sets.
The first set will always start with an “H,” followed by a time stamp, followed by the output channels
displayed in the left column below. A carriage return separates the first set of data from the second,
which starts with a “C” and continues with the output channels specified in the column on the right.
Current SS A
Bin # A
Column Temp Stabilized A
Number Conc. A
Delta T A
Overflow A
T1 A Read
Bin Array A*
T2 A Read
Bin # B
T3 A Read
Number Conc. B
T Nafion A
Overflow B
T Inlet A
Bin B Array B*
T OPC A
T Sample A
Sample Flow A
Sheath Flow A
Sample Pressure A
Laser Current A
1st Stage Mon. A
Valve Set A
Current SS B
Column Temp Stabilized B
Delta T B
T1 B Read
T2 B Read
T3 B Read
T Nafion B
T Inlet B
T OPC B
T Sample B
Sample Flow B
Sheath Flow B
Sample Pressure B
Laser Current B
1st Stage Mon. B
Valve Set B
Alarm Code
* Bin Array A and Bin Array B are arrays containing Bin 1, Bin 2, Bin 3… Bin 30 counts for Column A and B,
respectively.
