WJ-8611 DIGITAL VHF/UHF RECEIVER
3-30 LOCAL
OPERATION
5.
The PRE DWELL parameter determines the time that the receiver
stops at each increment of a scan sequence, waiting for a signal to
break the programmed squelch threshold. The pre dwell time can
range from 0 to 1000, in 5 msec increments. Values ranging from 0
to 995 msec specify the pre dwell time in msec. Step values are
rounded to the nearest 5 msec increment. A value of 1000 selects an
infinite pre dwell time. From the numeric keypad, enter the desired
Pre Dwell time, and terminate the entry by pressing the SETUP key.
When the entry is terminated, the value is momentarily displayed in
the menu, and the display increments to the SIG DWELL selection.
6.
The SIG DWELL parameter determines the time that the receiver
remains on an acquired signal. The signal dwell setting can range
from 0 to 601, in 1 second increments. Values ranging from 0 to
600 specify the signal dwell time in seconds (0 to 10 minutes). A
value of 601 specifies an infinite dwell time. It the signal falls
below the squelch level before the timer expires, the scan resumes to
the next increment. From the numeric keypad, enter the desired
Signal Dwell time, and terminate the entry by pressing the SETUP
key. When the entry is terminated, the value is momentarily
displayed in the menu, and the display increments to the POST
DWELL selection.
7.
The POST DWELL parameter determines how long a the receiver
waits at an acquired signal’s frequency after the signal falls below
the programmed squelch level. The post dwell setting can range
from 0 to 61, in 1 second increments. Values ranging from 0 to 60
specify the post dwell time in seconds (0 to 60 seconds). A value of
61 specifies an infinite dwell time. From the numeric keypad, enter
the desired Post Dwell time, and terminate the entry by pressing the
SETUP key. When the entry is terminated, the value is momentarily
displayed in the menu, and the SETUP menu mode is terminated.
Courtesy of http://BlackRadios.terryo.org
Summary of Contents for WJ-8611
