Copyright 2022 Baker Hughes Company.
English–UNIK 5*00 Series | 1
1. Introduction
This manual is applicable to UNIK family pressure sensors consisting of the following product
series:
•
UNIK
5000, UNIK
5600, UNIK
5700, UNIK
5800 and UNIK
5900
The original language of this manual is English.
1.1 Manufacturer
The identified manufacturer of this equipment is:
“Druck Limited”
Fir Tree Lane, Groby, Leicester, LE6 0FH, United Kingdom.
Telephone: +44 116 231 7100; Fax: +44 116 231 7103
Internet:
Druck.com
Under the instruction of Druck Limited, the pressure sensors may also be manufactured in China
by:
Baker Hughes Sensing & Inspection (Changzhou) Co., Ltd.
Building 9A, Jintong International Industrial Park, No. 8 Xihu Road, Wujin High-Tech
Industrial Zone, Changzhou, Jiangsu 213164, China.
Each sensor is marked to indicate the country of manufacture.
2. Description
2.1 Purpose
UNIK pressure sensors (hereinafter referred to as sensors) are designed for continuous
measurement and conversion of gauge, atmospheric, absolute and differential pressure into an
analogue output signal of direct current or voltage.
UNIK is a family of modern pressure sensors of modular design, the parameters of which are
chosen by the customer at the time of order, see Figure
Figure
1: Modular Design of UNIK Pressure Sensors
The sensors are designed for measurement of pressure in systems.
1 Pressure connector.
2 Pressure measuring module.
3 Partially encapsulated electronics module.
4 Electrical connection.
5 Cylindrical metal housing.
1
2
3
4
5
