Figure F
Figure H
Figure I
ASSEMBLY INSTRUCTIONS
For Standard Drum set DK7500 and Junior Drum set DKJ5500
©2009 TMP, Inc. Drumfire™ and the Drumfire™ logo are trademarks of
The Music People, Inc., the innovators of On-Stage Stands® and other premium
brands. Printed and manufactured in China.
www.musicpeople.com • www.onstagestands.com
Continued from front.
Figure G
Snare Drum
Snare Basket
Angle Adjustment
Basket Adjustment
Height Adjustment
Junior Drum Set
Snare Drum
Snare Basket
Angle Adjustment
Height Adjustment
Standard Drum Set
Basket Adjustment
Felt
Washers
Memory
Lock
Long Nut
Screw
Plate Strip
Bottom
Cymbal
Top
Cymbal
Hi-Hat
Seat
Pull Rod
Clutch
Nut
Plastic
Washer
Plastic
Washer
Felt
Washer
Figure E
Wing Nut
Cymbal
Cymbal
DK7500
Cymbal Stand
DKJ5500
Cymbal Stand
Plastic
Washer
Cymbal Seat
Felt
Washers
ASSEMBLING THE CYMBAL
(
Figure E
)
20. Remove the wing nut and first
felt washer from the top of the
cymbal stand.
21. Take the cymbal and place
it on the stand.
23. Replace the felt washer
and wing nut. Tighten.
HI HAT STAND
(
Figure F
)
24. Remove clutch from pull rod.
25. Place a cymbal upside down
on hi-hat seat and felt washer.
26. Unscrew the nut from the bottom
of the clutch. Take off the bottom
washer and felt and place the top cymbal on the
clutch. Replace the felt and washer and screw the
bolt back onto the clutch.
27. Replace clutch, with cymbal attached,
onto the pull rod.
ASSEMBLING THE SNARE
Junior Drum Set
(
Figure G
)
28. Unfold the snare stand
29. Place the snare drum in the snare basket.
30. Adjust one of the snare arms
to fit the snare drum snugly.
ASSEMBLING THE SNARE
Standard Drum Set
(
Figure H
)
31. Unfold the snare stand
32. Place the snare drum in the snare basket
33. Adjust the knob below the snare basket to fit
the snare drum snugly.
ATTACHING THE DRUM PEDAL
TO THE BASS DRUM
(
Figure I
)
34. Place the base of the pedal under the bass
drum hoop and make sure the clamp is over the
hoop. Tighten the screw until the clamp fits
securely on the hoop.
