Version 1.00
023-903504
Introduction & Installation
4-1
4. Operation
Once the unit has been connected to both power and fluid lines, follow the operation guidelines
below to adjust the temperature of the outlet air. Be sure to entirely read and understand this
section before trying to start and run your new DRYAIR system.
Controls
The temperature on the unit is controlled thermostatically, allowing the unit to self-regulate the
desired temperature.
•
The thermostatic control is adjusted with a screw driver. Simply adjust to the desired
temperature and toggle the switch to the “ON” position.
When the desired temperature is reached, the control will shut off the fan, thus stopping heat
transfer from the coils. Demand for heat will re-activate the fan.