Version 1.00
023-903504
Maintenance
6-1
6. Maintenance
DRYAIR products are designed to be low maintenance systems. All assemblies are assembled
using extensively tested and certified components. Following these maintenance procedures will
ensure the maximum benefit and least amount of downtime for the system. The daily
maintenance schedule is designed to be a quick system check and ensures a low risk of operating
interruptions.
Daily Checklist
Check the Heat Coil for Cleanliness or Clogging
•
Clean as required
Note: Do not use high pressure air or water to clean the coil as this will cause damage to the
coil fins.
Check all Fluid Fittings and Connections Daily
•
Tighten or replace as required.
Storage
Hardware
•
Exercise reasonable care when handling.
•
The Maxcoil should be sheltered when stored for extended periods of time.
Hose & Poly
•
To extend the life of the rubber and poly components of the system (hoses and air tubes), it is
recommended that they be stored out of the sun when not in use.
HTF
•
See Material Safety Data Sheets in Appendix – Heat Transfer Fluid Information for full
details