6
Overview
Thank you for purchasing a Drytac
Jet
Mounter
™
Cold Mount Laminator. The information
contained in this manual will familiarize you with the basic methods of mounting and
laminating using this easy-to-use two roller laminator. This manual covers five
Jet
Mounter
™
models:
Model
Width
Maximum Laminate
JM18
25.5” (64.8 cm)
18.25” (46.4 cm)
JM26
33.25” (84.5 cm)
26.25” (66.7 cm)
JM34
TBA
TBA
JM44/JM44SHA
52.75” (134.0 cm)
44.125” (112.1 cm)
JM54/54SHA
62.5” (135.3 cm)
54.125” 137.5 cm)
These models are similar in operation, but not identical. Unless otherwise indicated, the
instructions are for the JM26 model. Specific comments regarding the JM44, JM54 and
JM54SHA models are made where differences occur.
Important Safety Information
Before operating this equipment for the first time, it is crucial that you take the time to read
and understand all of the following safety-related information. Failure to follow these
procedures could result in serious personal injury and/or damage to the equipment and work
piece.
Safety Signal Words and Symbols
Danger
symbols indicate imminently hazardous situations that, if not avoided, will result in
serious injury or death.