9
S E C T I O N 5
Setting VPM5580TC Options
5.1
Setting The Time and Date
The time and date on the security system will be automatically updated by the Communiqué.
To set the time and date on the Communiqué, please see the
Communiqué Operation Manual.
5.2
Volume Control
The volume of the system messages/prompts can be controlled with this feature.
With the system disarmed (Section 3.3—Disarming), access the security system (Section 2—
Accessing Your Security System) and select a partition (Section 2.3—Accessing Partitions).
Press [
✱
]. You will hear the prompt:
“ For Special Functions, press [6].”
“ For Special Functions, press [6].”
“ For Special Functions, press [6].”
“ For Special Functions, press [6].”
“ For Special Functions, press [6].”
Press [6]. The system will prompt:
“ Enter your Master Code”
“ Enter your Master Code”
“ Enter your Master Code”
“ Enter your Master Code”
“ Enter your Master Code”
Enter the Master Code. The system will prompt:
“ For Volume Control, press [2].”
“ For Volume Control, press [2].”
“ For Volume Control, press [2].”
“ For Volume Control, press [2].”
“ For Volume Control, press [2].”
Press [2]. The system will then announce the current volume setting in one of three ways:
“ Volume is low. To change volume, press [1].”
“ Volume is low. To change volume, press [1].”
“ Volume is low. To change volume, press [1].”
“ Volume is low. To change volume, press [1].”
“ Volume is low. To change volume, press [1].”
“Volume is Medium. To change volume, press [1].”
“Volume is Medium. To change volume, press [1].”
“Volume is Medium. To change volume, press [1].”
“Volume is Medium. To change volume, press [1].”
“Volume is Medium. To change volume, press [1].”
“ Volume is high. To change volume, press [1].”
“ Volume is high. To change volume, press [1].”
“ Volume is high. To change volume, press [1].”
“ Volume is high. To change volume, press [1].”
“ Volume is high. To change volume, press [1].”
Press [1] to toggle through the volume levels until the desired volume is selected.
Press [#] to return to the Special Functions menu.
5.3
Speech Rate Control
The speech rate of the system messages/prompts can be controlled with this feature.
With the system disarmed (Section 3.3—Disarming), access the security system (Section 2—
Accessing Your Security System) and select a partition (Section 2.3—Accessing Partitions).
Press [
✱
]. You will hear the prompt:
“ For Special Functions, press [6]”
“ For Special Functions, press [6]”
“ For Special Functions, press [6]”
“ For Special Functions, press [6]”
“ For Special Functions, press [6]”
Press [6]. The system will prompt:
“ Enter your Master Code”
“ Enter your Master Code”
“ Enter your Master Code”
“ Enter your Master Code”
“ Enter your Master Code”
Enter the Master Code. The system will prompt:
“ For Speech Rate control, press [3]”
“ For Speech Rate control, press [3]”
“ For Speech Rate control, press [3]”
“ For Speech Rate control, press [3]”
“ For Speech Rate control, press [3]”
Press [3]. The system will then announce the current speech rate in one of two ways:
“Speech rate is fast. To change speech rate, press [1].”
“Speech rate is fast. To change speech rate, press [1].”
“Speech rate is fast. To change speech rate, press [1].”
“Speech rate is fast. To change speech rate, press [1].”
“Speech rate is fast. To change speech rate, press [1].”
“Speech rate is slow. To change speech rate, press [1].”
“Speech rate is slow. To change speech rate, press [1].”
“Speech rate is slow. To change speech rate, press [1].”
“Speech rate is slow. To change speech rate, press [1].”
“Speech rate is slow. To change speech rate, press [1].”
Press [1] to toggle between the speech rates until the desired rate is selected.
Press [#] to return to the Special Functions Menu.
