DSC PC1555 CP-01 Installation Manual Download

Page: 44 / 56

The Download Access Code

Download Access Code

Download Access Code and Panel Identifier Code

Panel Identifier Code

are for security and proper identification. Both the panel
and the computer file should have the same information
programmed before attempting to download.
The time to complete a successful download can be signif-
icantly reduced with the use of the PC-Link. This adaptor
makes it possible to perform on-site downloading. To Ini-

Ini-

tiate Local Downloading via the PC-Link

tiate Local Downloading via the PC-Link, enter [

✱

][8]

[Installer Code] [499] [Installer Code] [499]. All keypads
will be busy for the duration of the PC-Link connection.
The status LEDs will display the current system status on
the keypad where the PC-Link was initiated. For more
information on connecting the PC-Link, refer to your ’PC-
Link Download Kit Instruction Sheet’.
Downloading can also be performed through the
LINKS1000 cellular communicator if the telephone line is
disconnected. If using the LINKS1000 with Call Back, you

need to program the LINKS1000 Preamble

LINKS1000 Preamble

LINKS1000 Preamble with the

downloading telephone number in order for the panel to
call the computer correctly.

NOTE:

When uploading labels from LCD keypads, the DLS

software will receive the labels only from the LCD keypad
assigned to slot 8. In addition, version 1.0 and version 2.0
LCD keypads are not compatible on the same system. For
more information refer to the Download Manual included
with the computer software.

NOTE:

The most recent version of the PKP-LCD keypad on

the system should be assigned to slot 8.

Answering Machine Double Call Timer  . . . . . . . . . . . Section [405]
Download Computer Telephone Number   . . . . . . . . . Section [402]
Download Access Code . . . . . . . . . . . . . . . . . . . . . . . Section [403]
Panel Identifier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Section [404]
LINKS1000 Preamble (Downloading)  . . . . . . . . . . . . . Section [490]

NOTE:

To perform downloading via the T-Link module,

Option [1], Section 401 must be enabled or the number of
rings in section 406 must be programmed.

NOTE:

Option [2] applies to DLS via T-Link as well. Options

[3] and [4] cannot be performed through T-Link.

[402] - Downloading Computer’s Telephone Number

This telephone number is 32 digits in length.

[403] - Downloading Access Code

This 4-digit Hexadecimal code allows the panel to con-
firm that it is communicating with a valid downloading
computer.

[404] - Panel Identification Code

This 4-digit Hexadecimal code allows the downloading
computer to confirm the identity of the control panel.

[405] - Double-Call Timer

This timer sets the amount of time that can be taken
between calls when using Double Call to contact the
panel.
Valid entries are 001 to 255 (seconds).

[406] - Number of Rings to Answer On

The value in this section determines how many rings that
the panel will automatically pick up on in order to estab-

lish a DLS connection. Default value is 000 rings. Valid
entries are [000]-[020].

NOTE:

If Section [401] Option 1 and Section [406] are

enabled, either one will work depending on how the
installer calls the premises.

[490] - LINKS DLS Phone Number Preamble

Refer to Section [390].

[499] - Initiate PC-LINK Communications

The installer may initiate a PC-Link DLS session between
a computer and panel by entering this section in the fol-
lowing manner:
[499] - [Installer Code] [499].
The installer should already have the PC-Link cable prop-
erly connected between the panel’s header and the down-
loading computer as well as have the DLS file waiting for
the panel to connect before entering this command.

NOTE:

PC-Link cannot be initiated while the panel is com-

municating via the phone line.

[401] - First Downloading Option Codes

Option

Downloading Code

On/Off

Description

Downloading Answer

Downloading Answer Enabled.

The system will answer calls for downloading if a successful

Double call routine is detected. Have the downloading computer call the system and let the tele-
phone line ring once or twice. After 1 or 2 rings, hang up. If called back within the programmed
Double Call Time (000-255 seconds), the panel will answer on the first ring.

OFF

Downloading Answer Disabled.

The system will not answer incoming calls using the Double

Call routine unless the User enables the DLS window. This option can be enabled by turning
Option 2 ON.

DLS Window

User Can Enable DLS Window.

The user can use the [*][6][Master Code][5] command to

enable a 6-hour window in which the panel will answer calls for downloading if a successful
Double Call routine is detected. If this option is enabled, the window is open upon power-up.
The window is on for the full 6 hours if enabled.

OFF

User Can Not Enable DLS Window.

The user can not enable a window for DLS calls.

NOTE: Options 1 and 2 are not related. One does not need to be enabled for the other
to perform its function.

Call-Back

Call-Back Enabled

. When the system answers the downloading computer’s call, both the com-

puter and the panel will hang up. The panel will then call the Downloading Telephone Number
and connect with the computer at that number. If more than one downloading computer is to
be used, this function should be disabled.

OFF

Call-Back Disabled.

The downloading computer will have immediate access to the panel once

it is identified as a valid system.

User Call-Up

User Call-Up Enabled.

When this feature is enabled, the user may initiate a single call of the

Downloading Telephone by entering [*][6][Master Code][6].

OFF

User Call-Up Disabled.

An error tone will be generated when [*][6][Master Code][6] is

entered.