Appendix 3: Regulatory Information
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or tele-
vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or experienced radio/television technician for help.
CAN ICES-3 (B) / NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de classe B est conforme à la
norme canadienne ICES-003.
The reference to the WS900-xx throughout this manual is applicable to the following model numbers: WS900-19 and
WS900-29.
FCC ID:F5316WS90019
FCC ID:F5316WS900-29
IC: 160A-WS90019
IC: 160A-WS90029
FCC/ISED CANADA WIRELESS NOTICE
This equipment complies with FCC and ISED Canada radiation exposure limits set forth for an uncontrolled environment.
The antenna should be installed and operated with minimum distance of 20 m between the radiator and your body.
Antenna gain must be below:
Frequency band
3G7090
GSM 850 / FDD V
2.1 dBi
PCS 1900 / FDD II
3.7 dBi
Frequency band
LT7090
LTE B4 (1700 MHz)
1.5 dBi
LTE B13 (700 MHz)
2.2 dBi
This transmitter can be co-located or operating in conjunction with any other antenna or transmitter.
The reference to the Cellular Communicator xx7090 throughout this manual is applicable to the following model numbers:
3G7090 and LT7090.
FCC ID:F53163G7090
FCC ID:F5316LT7090
IC: 160A-3G7090
IC: 160A-LT7090
WARNING: To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation distance of 20cm or more must be maintained
between the antenna of this device and persons during device operation.
NIST Validation of encryption algorithm AES128 certificate No. 4053
FCC/IC LABEL
The modular transmitter 3G7090 or LT7090 is labeled with its own FCC ID and IC number. When the module is installed
inside the host device WS900-19 or WS900- 29 and the FCC ID/IC of the module is not visible, the host device displays the
provided label referring to the FCC ID and IC of the enclosed module. This label is shipped together with the module and it
is the responsibility of the integrator to apply it to the exterior of the enclosure, as displayed in the following figure.
- 59 -
