INSTALLATION MANUAL
DS-N4 - HD-SDI Video
Page:
44
Page:
44
DSE SRL - ITALY - WWW.DSE.EU
Press start to start exporting the progress of which will be shown by the blue band. When the message appears to report the BACKUP
SUCCEED
correct term
operation.
On the unit USB memory that you find yourself connected to a video file for each camera containing the overall recording period you
have selected.
INFORMATION (information)
In this section you will find all the information on DVR. There are 3 sections:
SYSTEM
- Includes all information on the DVR version
SYSTEM
- Includes all information on the DVR version
LOG
- Provides access to system event log. The DVR keeps in memory all the transactions undertaken by users both locally and
LOG
- Provides access to system event log. The DVR keeps in memory all the transactions undertaken by users both locally and
remotely. For each event are given the LOG type, user, date / time, and IP address. The LOG window includes the search functions for
date / time and type. E 'can export selected events on the USB device with the EXPORT button (create .LOG file)
NETWORK
- Includes all the information about the status of the DVR Network (addresses, ports, etc.)
NETWORK
- Includes all the information about the status of the DVR Network (addresses, ports, etc.)
HARD DISK (memory unit)
In this section are listed all the memory unit connected to the DVR, both internal (Hard Disk) and external that is connected to the USB
jack.
The table provides for each unit the signs of type, size, free space and working condition.
FORMAT THE DISC
- In this section you can format your hard disk by selecting the unit and pressing the FORMAT button. Wait while
FORMAT THE DISC
- In this section you can format your hard disk by selecting the unit and pressing the FORMAT button. Wait while
following the progress of the progress bar. E 'have to format the Hard Disk always after a new disk is installed.
Formatting the drive will erase all data on it.
UPGRADE (update)
In this section you can update the system firmware after loading it on a USB stick. This operation is required only on the instructions of
the DSE technicians.
