Document:
RE-TCC5E 1G1
Document:
RE-TCC5E 1G1
Page:
2
Page:
2
OWNER'S MANUAL
RE-TCC5E Color Wired cameras
DSE - ITALY - WWW.DSE.EU
PIN DIRECT
1
DAMP - 2
DAMP + 3
DRIVE + 4
DRIVE -
Once the lens is screwed, it is necessary to proceed to the focus adjustment.
First, you must adjust the focal distance from the CCD by acting on the lever on the side of the
camera to obtain a first commissioning coarse fire. The side lever must be unscrewed about half
a turn in order to rotate the ring. Once in a distance that allows an acceptable vision hangs the
ring by screwing the pin. At this point it is possible to refine the vision by turning the focus
adjustment of the lens to obtain the best focus.
Programming Menu
The camera is equipped with a programming menu screen for advanced features. Open the side
door to access the panel, press the button in the center between the arrows to display the
on-screen menu.
For instructions on features of the OSD Refer to the separate documentation on the DSP-E
SONY EFFIO
Audio
The RE-TCC5E camera does not have onboard microphone; If required you can use the external
microphone RE-CM2.
Main technical data
RE-TCC5E
Camera Type
hard-wired
Colors / white / black
color day night function
video standards
PAL 2: 1 interlace
CCD Sensor
Sony 1/3 '' Super HAD
Number of pixels in the CCD
1020 (L) x596 (H)
horizontal Resolution
With 650 TV lines.
Video Signal Process
Digital - DSP
Video Signal Synchronization
internal
Minimum required illumination for shooting
Color 0.3 Lux B / N
0.0001 Lux
gamma correction
0.45 / 1
Signal / noise ratio (S / N ratio)
Over 50 dB
Automatic Gain Control (AGC)
Yes (programmable level)
Automatic electronic shutter
Automatic or fixed adjustable
iris diaphragm
Compatible with DC DRIVE lenses
Compensation against the light (BLC)
Yes (adjustable level)
Day / Night function (color day / night bn)
Yes (adjustable threshold)
infrared lighting compatible
850 nm
video Output
1V pp composite video 75
Ohms
audio Output
-
built-in ambient microphone
No
the camera power supply
DC 12V
Power consumption
2 W
Power supply 230VAC / 12VDC included
No
Support bracket included
No
Target
No
MIRROR function for image reversal
Horizontal
overlay
ID Camera, Motion
MASK function for privacy protection
4 programmable masks
Motion detection
You - Only display screen
Operating temperature
- 10 ° ... + 50 ° C
External dimensions (mm.)
56 (L) x71 (H) x133 (P)
Weight
480 gr.
