DSE7110 & DSE7120 Operator Manual
13
4.1.2
ANALOGUE SENSORS
PIN No
DESCRIPTION
CABLE
SIZE
NOTES
15
Sensor Common Return
0.5mm²
AWG 20
Return feed for sensors*
16
Oil Pressure Input
0.5mm²
AWG 20
Connect to Oil pressure sensor
17
Coolant Temperature Input
0.5mm²
AWG 20
Connect to Coolant Temperature sensor
18
Flexible Sensor Input
0.5mm²
AWG 20
Connect to sensor
****
NOTE:
NOTE:
NOTE:
NOTE:---- . It is
. It is
. It is
. It is VERY
VERY
VERY
VERY important that terminal 1
important that terminal 1
important that terminal 1
important that terminal 12
2
2
2 (sensor common) is soundly connected to an earth
(sensor common) is soundly connected to an earth
(sensor common) is soundly connected to an earth
(sensor common) is soundly connected to an earth
point on the ENGINE BLOCK, not within the control panel, and must be a sound electrical connection to
point on the ENGINE BLOCK, not within the control panel, and must be a sound electrical connection to
point on the ENGINE BLOCK, not within the control panel, and must be a sound electrical connection to
point on the ENGINE BLOCK, not within the control panel, and must be a sound electrical connection to
the sensor bodies.
the sensor bodies.
the sensor bodies.
the sensor bodies. This connection MUST NOT be used to provide an earth connec
This connection MUST NOT be used to provide an earth connec
This connection MUST NOT be used to provide an earth connec
This connection MUST NOT be used to provide an earth connection for other
tion for other
tion for other
tion for other
terminals or devices. The simplest way to achieve this is to run a
terminals or devices. The simplest way to achieve this is to run a
terminals or devices. The simplest way to achieve this is to run a
terminals or devices. The simplest way to achieve this is to run a SEPARATE
SEPARATE
SEPARATE
SEPARATE earth connection from the
earth connection from the
earth connection from the
earth connection from the
system earth star point, to terminal 12 directly, and not use this earth for other connections.
system earth star point, to terminal 12 directly, and not use this earth for other connections.
system earth star point, to terminal 12 directly, and not use this earth for other connections.
system earth star point, to terminal 12 directly, and not use this earth for other connections.
NOTE:
NOTE:
NOTE:
NOTE:---- . If you use PTFE insulating tape
. If you use PTFE insulating tape
. If you use PTFE insulating tape
. If you use PTFE insulating tape on the sensor thread when using earth return sensors,
on the sensor thread when using earth return sensors,
on the sensor thread when using earth return sensors,
on the sensor thread when using earth return sensors,
ensure you do not insulate the entire thread, as this will prevent the sensor body from being earthed via
ensure you do not insulate the entire thread, as this will prevent the sensor body from being earthed via
ensure you do not insulate the entire thread, as this will prevent the sensor body from being earthed via
ensure you do not insulate the entire thread, as this will prevent the sensor body from being earthed via
the engine block.
the engine block.
the engine block.
the engine block.
NOTE:- Terminals 19 to 21 are not fitted to the DSE7100 series controllers.
4.1.3
MAGNETIC PICKUP
PIN No
DESCRIPTION
CABLE
SIZE
NOTES
22
Magnetic pickup Positive
0.5mm²
AWG 20
Connect to Magnetic Pickup device
23
Magnetic pickup Negative
0.5mm²
AWG 20
Connect to Magnetic Pickup device
24
Magnetic pickup screen
0.5mm²
AWG 20
Do not connect the other end to earth!
NOTE:- Screened cable must be used for connecting the Magnetic Pickup, ensuring that the screen is
earthed at one end ONLY.
CALL US TODAY
1-888-POWER-58
REQUEST A QUOTE
parts@genpowerusa.com
SHOP ONLINE
www.genpowerusa.com
