Introduction
8
2 INTRODUCTION
This document details the installation and operation requirements of the DSE8610 Series modules,
part of the DSEPower® range of products.
The manual forms part of the product and should be kept for the entire life of the product. If the
product is passed or supplied to another party, ensure that this document is passed to them for
reference purposes.
This is not a
controlled document.
You will not be automatically informed of updates. Any future
updates of this document will be included on the DSE website at www.deepseaplc.com
The
DSE8600 series
is designed to provide differing levels of functionality across a common platform.
This allows the generator OEM greater flexibility in the choice of controller to use for a specific
application.
The
DSE8600 series
module has been designed to allow the operator to start and stop the generator,
and if required, transfer the load to the generator either manually (via fascia mounted push-buttons) or
automatically.
Synchronsing and Load Sharing features are included within the controller, along with the necessary
protections for such a system.
The user also has the facility to view the system operating parameters via the LCD display.
The
DSE8600
module monitors the engine, indicating the operational status and fault conditions,
automatically shutting down the engine and giving a true first up fault condition of an engine failure by
a COMMON AUDIBLE ALARM. The LCD display indicates the fault.
The powerful ARM microprocessor contained within the module allows for incorporation of a range of
complex features:
•
Text based LCD display (supporting multiple languages).
•
True RMS
Voltage, Current and Power monitoring.
•
Engine parameter monitoring.
•
Fully configurable inputs for use as alarms or a range of different functions.
•
Engine ECU interface to
electronic engines
.
•
Direct connection to governor / AVR for synchronising and load sharing
•
R.O.C.O.F. and Vector shift for detection of mains failure when in parallel with the mains supply.
Using a PC and the Configuration Suite software allows alteration of selected operational sequences,
timers and alarms.
Additionally, the module’s integral fascia configuration editor allows adjustment of a subset of this
information.
A robust plastic case designed for front panel mounting houses the module. Connections are via
locking plug and sockets.
Summary of Contents for DSE8610
