MANUAL MOBILE APP
Video recorders DX Series
Page:
9
Page:
9
DSE SRL - ITALY - WWW.DSE.EU
connection before starting the simultaneous playback of multiple channels to avoid excessive latency.
In LIVE vision it is possible to bring it to full screen only one channel with a double-tap on the image and bring the device in orizzonatale
mode to mask the commands and maximize the viewing area. Below you provide the following playback control buttons:
Command
Function
Stop / Start the live video of the selected camera
Capture a frame of the channel at that moment. The picture is stored in the mobile device's
memory and you can see in the section SAVED PHOTOS Starts recording of the selected
channel
The recording is stored in the mobile device's memory and can be reproduced in the section
LOCAL VIDEO
If while you are connected with a DVR occur alarms (eg. Motion) they are transmitted to the
mobile device and this icon is illuminated. See the following section.
Enable / Disable audio playback
Above the playback buttons there is a panel of the device command. It consists of 3 pages that you browse by sliding the screen. The
Above the playback buttons there is a panel of the device command. It consists of 3 pages that you browse by sliding the screen. The
third box is not used ta.
third box is not used ta.
Command
Function
quick channel selection. The last button shows the channels 9-16 in
the 16 inputs DVR. The button with the gear sets some playback
options described below.
