16 Chapter 3 Configuring Your IP1200C
ports as follows. For 4-port IP1200C, the preset ports are TCP 1100 port and UDP 1101-1104 ports; for 8-port
IP1200C, they are TCP 1100 port and UDP 1101-1108 ports.
Device-to-Phone Setup
IP1200C provides Device-to-Phone Mode allowing you to place Internet calls to any regular telephone numbers in
the world. You will have to subscribe DSG ITSP Network services. You will be given
calling points
stored in your
6-digit
Port
Device ID Number
. With a valid account, you can make Internet phone calls to any regular
telephone
within available service areas.
Device ID (Non-editable)
Every DSG VoIP Device has its unique 6-digit Device ID Number. On IP1200C, each device has a 5-digit ID and
each port has its 6-digit ID, which composes of the 5-digit ID of the device and the 1-digit port number. You may
find the 5-digit ID in this section. This is a non-editable area. The 6-digit Device ID, that is the port ID, is your
default account to store calling points.
Note:
For more information about purchasing calling points, please contact your local distributor or send a mail to
sales@dsg.com.tw.
Check Account Balance
After you subscribe DSG ITSP Services, you can check the balance of your 6-digit Device ID Number when your
IP1200C is online.
Step 1 At the prompt displays
Select the option to setup:
, input <19> and press ENTER to check account balance.
Step 2 When the prompt shows
Are you sure (y/n)?
,type <
y>
and press any key to continue.
Step 3 You can view the balance of each port’s 6-digit ID.
Prompt example:
If your 5-digit device ID is 95000 and the IP1200C have 8 ports. Your balance will show as below.
Select the option to setup: 19
Are you sure (y/n)? [n] y
ID NO. Balance
--------- ----------
950001 1000
950002 1000
950003 1000
950004 1000
950005 1000
950006 1000
950007 1000
950008 1000
Notice that the effective period of calling points is 9-month from the initial use. When it expires, it shows as
Expired
. When the account is not correctly input or it is an invalid account, it shows as
Wrong account
.
Long-distance Code
Step 1 At the prompt displays
Select the option to setup:
, input <9> and press ENTER to edit the Long-distance
Code.
Step 2 After the prompt displays
New Long-distance Code (digits, press ESC to exit):
, input your long-distance
code <xx...> and then press ENTER.
Prompt example:
If you are in the US, your long-distance code is 1. Input it as follows.
Select the option to setup: 9
Summary of Contents for IP1200C
Page 1: ...07I12CM ENC Voice Communication for Free High Performance Embedded VoIP Gateway...
Page 8: ......
Page 12: ......
Page 26: ......