High Security Series Tandem Full Height Turnstile Fasteners
For mounting the cross arms to the main channel
For mounting the control head to the mainframe
For mounting the four yoke assemblies to the cross arms
For mounting the barriers to the cross arms
Qty 14 -
3/8“-16 x 3.75” wedge type concrete anchors with nuts and washers
For mounting yoke assemblies and barrier assembles to concrete
Qty 2 -
5/8”-11 x 4.5“ wedge type concrete anchors with nuts, bearing blocks
and greased roller bearings
For the rotor bearing assemblies to the concrete
Qty 8 -
2” x 2“ square ribbed black plugs
For decorative plugging of the ends of the yoke cross arms
Qty 2 -
2” x 4” rectangle ribbed black plugs
For decorative plugging of the ends of the barrier cross arm
All High Security Series Full Height Tandem Turnstiles
Note: DS427 & DS430 models share a universal fastener kit.
If some bolts seem like they are too long, this is the reason.
Properly assembled, they will not be visible.
Some options (such as canopies) may alter fastener requirements.
Fun fact: the threads on stainless steel fasteners have a tendency to malform and bind under some
circumstances. This is known as galling and can make life very inconvenient. Galling can cause the
threads to fuse together with friction welding, making the nuts impossible to remove. Fortunately,
there are some simple steps that can be taken to prevent it from occurring.
alloy used in the nut prevents the galling from occurring. Not only that, but this type of nut makes
than standard lock washers, which rely on spring tension for gripping. We are also coating these
nuts with carnauba wax for an additional layer of protection against galling.
512-321-4426
INS-DS400T-190401
Designed Security, Inc - 1402 Hawthorne Street, Bastrop Texas 78602 - (800) 272-3555
sales@dsigo.com
7
