Proper Turnstile Usage
The 6500 Series Control head is easy to use. There are a few things that users should be trained
on and informed of.
- In the case of an electronic turnstile, approach the unit and present access control credentials.
Do not push on the arms of the rotor until after the access control device successfully unlocks the
turnstile. A sturdy click sound will be heard from the main channel when the solenoid pulls the
locking bar open.
- Note that the turnstile will not unlock the rotor is being pushed on before access control
activates the solenoid. The unit should unlock once pressure is released but it is a better practice
to wait until the unit is unlocked before pushing on the rotor.
- Once access has been granted, proceed through the turnstile immediately. Waiting too long
could cause the rotor to time out mid-rotation, forcing the user to back out of the turnstile. There
are timer settings for adjusting how long it takes for this to occur. The default time provided is 7
seconds. The reason for this is in case somebody swipes and walks away without passing
through.
- Walk at a reasonable pace through the turnstile. Do not slam the rotor through the rotation.
This can be unsafe and may cause unnecessary wear and tear to the control head.
- Try to be respectful of users wanting to pass through the opposite direction. Allow people who
are waiting an opportunity to pass through the turnstile.
- Avoid rotating the rotor of a full height without being in the passage. This will cause the rotor
to re-lock before you have a chance to pass through the turnstile.
- Piggybacking : More than one user trying to squeeze through the turnstile on one rotation
should be avoided. Large bags and carts should be brought through an alternate means of
entrance.
512-321-4426
INS-DST80S-190401
Designed Security, Inc - 1402 Hawthorne Street, Bastrop Texas 78602 - (800) 272-3555
sales@dsigo.com
24
