System Installation
96M4011o User’s Manual
3-3
3.4
Installing the Single Board Computer
To install your
96M4011o
into standard chassis or proprietary environment,
you need to perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place
96M4011o
into the dedicated position in your system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that your SBC is properly inserted and fixed by mechanism.
Otherwise, the system might be unstable or do not work due to bad contact of
PICMG 1.0 PCI plus ISA-bus slot.
Note:
Please refer to section 3-4-1 to 3-4-3 to install INF/VGA/LAN drivers.
3.4.1
Chipset Component Driver
The chipset on
96M4011o
is a new chipset that a few old operating systems
might not be able to recognize. To overcome this compatibility issue, for Windows
Operating Systems such as Windows-95/98/98SE/2000, please install its INF before
any of other Drivers are installed. You can find very easily this chipset component
driver in
96M4011o
CD-title.
3.4.2
Intel Integrated Graphics GMCH Chip
Using GMCH High performance graphic integrated chipset is aimed to gain an
outstanding graphic performance. It is accompanied by shared 8 to 64MB system
DDR-SDRAM with Intel DVMT. This combination makes
96M4011o
an
excellent piece of multimedia hardware.
With no additional video adaptor, this onboard video will usually be the system
display output. By adjusting the BIOS setting to disable on-board VGA, an add-on
PCI or ISA VGA card can take over the system display.
Drivers Support
Please find 845G/GV GMCH driver in the
96M4011o
CD-title. Drivers support
Windows-98/98SE/ME, Windows-NT 3.51/4.0, Windows-2000, OS2, and Linux.
(1) Windows-98/98SE: Please execute exe file to start graphics driver installation, or
bring up the Display Control Panel and update graphics driver.
