Dana
User Manual
Page 11 of 28
Copyrights DSP4YOU ltd
Tabbed Structure
Status
: Provides overall view of the current settings of Dana server including the model number, firmware
version, loaded I/O cards, DSP & CPU usage, IP settings. The bottom side of the page also includes up to 8
button shortcuts which can be assigned to a preset.
Audio settings
: Digital Signal Processing section of the interface. Provides control to all DSP algorithms
running on the floating point Sharc DSP. Note that this section is flexible with the choice of plug-ins and
loaded I/O cards.
AVB Configuration
: This section allows configuration of AVB streams on the network. Using a simple drag and
drop interface, one can easily configure streams between AVB end points.
GPIO
: Section providing control of the General Purpose Input Output interface.
Presets
: Section for the programming of preset configuration of the Audio setting section (DSP)
System settings
: Section for the general configuration of the Dana server (e.g. RS232/time&date/IP/firmware
upgrade…)
User Access
: Section for configuration of the user accounts.
3.2
Dana Server configuration
3.2.1
Audio settings
The audio settings page consists of 2 sections:
A monitoring section allowing metering of audio signals on the card slots as well as audio signals on the
Digital Audio Interface (DAI) such as the AVB signal or USB audio signals.
A center section allowing control of the various algorithms of the fixed architecture DSP.
See below one template plug-in configuration currently available on the Dana series.
The following sections will describe the configuration panel for each processing block.
